Steel
Special acidic detergent
Dosage:
0,5 - 1,5 %
Application area:
for cleaning medical washer-disinfectors and stainless steel instruments of fixed
soiling, limescale, rust and other inorganic soiling.
Price:
on request
a price
Composition
Active substance
Effect
Organic acids 15-30 %
Glycol ether 5-15 %
Non-ionic surfactants < 5 %
Product pH
approx. 1.5
Working solution pH
approx. 3.0
Appearance and odour
clear liquid with a specific odour.
Pack sizes
Volume
1 l
Minimum order
6 pcs x 1 l
Product code
8224
Barcode
6417964082241
Packaging
bottle
Description
Composition and packaging
Instructions for use
Documents and certificates
Application area
A special acidic detergent designed for cleaning medical washer-disinfectors and stainless steel instruments of fixed soiling, lime, rust and other inorganic soiling. The product also removes dirt stains from silicone and plastic surfaces.
Product features
- By removing deposits, the product restores the metal's original shine.
- Suitable for aluminium, copper and brass items.
- Used for both manual and machine processing, rinses off easily.
Composition
Active substance
Effect
Organic acids 15-30 %
Glycol ether 5-15 %
Non-ionic surfactants < 5 %
Product pH
approx. 1.5
Working solution pH
approx. 3.0
Appearance and odour
clear liquid with a specific odour.
Pack sizes
Volume
1 l
Minimum order
6 pcs x 1 l
Product code
8224
Barcode
6417964082241
Packaging
bottle
Dosage
0,5 - 1,5 %
Usage
Cleaning medical machines: use the descaling programme. A working solution concentration of 0.5 - 1.5 % is used (when calculating concentrations, base them on the volume of water in the machine, as stated in the machine documentation). Other cleaning programmes can also be used in the machine, but the detergent supply must be switched off to avoid a negative reaction with the acidic product Steel. When using Steel to clean the machine with any programme, instruments requiring restoration can be loaded and treated in the machine at the same time. Cleaning instruments: use a 20% working solution (prepared in warm water), soak for 30-60 min, then wipe to remove residual soiling. Finally, wash and dry the instruments.
Treating instruments in ultrasonic units: prepare the working solution in warm water (concentration 5 to 20%, depending on the condition of the instruments), then immerse the instruments in the unit (soaking) for 30 min, after which switch the unit on for 10 min. Finally, rinse thoroughly. The working solution is used for 1 working day; if visibly heavily soiled, replace it more often.
Treating instruments in ultrasonic units: prepare the working solution in warm water (concentration 5 to 20%, depending on the condition of the instruments), then immerse the instruments in the unit (soaking) for 30 min, after which switch the unit on for 10 min. Finally, rinse thoroughly. The working solution is used for 1 working day; if visibly heavily soiled, replace it more often.
Storage
Shelf life: 3 years.
Environment and safety
The product is eco-friendly and biodegradable; the PE-HD plastic packaging is recyclable.
Safety precautions
The product is acidic and must not be mixed with chlorine-containing products. The product must always be rinsed off; it must not remain on instruments and dry. Splashes on environmental surfaces are removed with water; wear protective gloves when working.
Similar products
Erideko 11
Product for pre-sterilisation cleaning of medical devices
Purpose:
for mechanised pre-sterilisation cleaning of medical devices, for use in washer-disinfectors of any type equipped with a dosing unit.
Concentration:
0,3 %
Price:
on request
Erinox
Special detergent
Purpose:
for pre-sterilisation cleaning of medical devices; for cleaning endoscopes and their instruments.
Concentration:
according to instructions
Price:
on request